Installation

[!CAUTION] Wild Kernels is not responsible for bricked devices or damage. By flashing, you assume all risk. Back up your data and understand the risks before flashing.

Choose your method

Method	When to use	Requires root
Kernel Flasher	Upgrading with root already available, no PC needed	Yes
magiskboot	Flash a pre-patched `boot.img` directly (no pre-rooted setup required)	No

Expand the section you need below — all are collapsed by default.

Prerequisites

GKI 2.0 device with an unlocked bootloader
Full backup (at minimal the boot partition or have a stock unmodified boot.img)
Correct AnyKernel3 ZIP for your kernel version from Releases

Supported versions

Only GKI 2.0 is supported — check marks show builds provided by this project:

Pre-GKI	GKI 1.0	GKI 2.0
3.10.x	5.4.x	5.10.x-android12 ✓
3.18.x		5.10.x-android13 ✓
4.4.x		5.15.x-android13 ✓
4.9.x		5.15.x-android14 ✓
4.14.x		6.1.x-android14 ✓
4.19.x		6.6.x-android15 ✓
		6.12.x-android16 ✓

For Pre-GKI or GKI 1.0 kernels, contact @TheWildJames to discuss possiblities.

[!IMPORTANT] Match by the full kernel version (e.g., 6.1.x-androidXX) — your device's Android version and the androidXX in the kernel version are not necessarily the same. For example, as of writing, a Google Pixel 8 is on 6.1.157-android14 while the system Android is 17.

Supported Devices

[!NOTE] These lists are maintained by the community — please update as needed!

See Supported Devices.

Install with Kernel Flasher — no PC, requires root

> [!NOTE] > More convenient when upgrading KernelSU and can be done without a computer. - Root access already granted to the flashing app (for first install from stock without root, use recovery/fastboot — see magiskboot section below) - AnyKernel3 ZIP matching your kernel version from [Releases](https://github.com/WildKernels/GKI_KernelSU_SUSFS/releases) **Steps:** 1. **Download the AnyKernel3 ZIP** from the latest [Releases](https://github.com/WildKernels/GKI_KernelSU_SUSFS/releases) page. 2. **Open the Kernel Flasher app**, grant root permissions when prompted. 3. **Select the AnyKernel3 ZIP** and flash. Do not interrupt. 4. **Reboot** when prompted and verify the manager shows the expected version. **Supported flashing apps:** | App | Notes | |-----|-------| | [Kernel Flasher](https://github.com/fatalcoder524/KernelFlasher) | Recommended, actively maintained |

Patch boot.img Manually (magiskboot) — Android / Linux

Use the [official magiskboot build](https://github.com/topjohnwu/Magisk/releases) — works on Android and Linux. **Preparation:** 1. Get your device's stock `boot.img`. 2. Download the AnyKernel3 ZIP for your kernel version from [Releases](https://github.com/WildKernels/GKI_KernelSU_SUSFS/releases). 3. Unpack the ZIP and get the `Image` file (the KernelSU kernel). **Android** — via adb + `libmagiskboot.so` (in `/data/local/tmp/`): ```sh # Push files adb push Magisk-*/lib/arm64-v8a/libmagiskboot.so /data/local/tmp/magiskboot adb push boot.img /data/local/tmp/ adb push Image /data/local/tmp/ # On device adb shell cd /data/local/tmp/ chmod +x magiskboot ./magiskboot unpack boot.img mv -f Image kernel ./magiskboot repack boot.img # Test then flash fastboot boot new-boot.img fastboot flash boot new-boot.img ``` **Linux** — official magiskboot: ```sh chmod +x magiskboot ./magiskboot unpack boot.img mv -f Image kernel ./magiskboot repack boot.img fastboot boot new-boot.img fastboot flash boot new-boot.img ```

Post-Install — Verify & Finish Setup

Do these checks in order after flashing: **1. Download matching manager — KernelSU / KernelSU-Next / ReSukiSU** - [ ] Download the `manager-apk-*` from the same [Releases](https://github.com/WildKernels/GKI_KernelSU_SUSFS/releases) page you got the kernel from. - [ ] Install / update it over any existing manager. - [ ] Open the manager — it should show the kernel version you just flashed (e.g. `6.1.x-androidXX-Wild`) and report "Working". **2. SUSFS** - [ ] In the manager, install the [sidex15/susfs4ksu-module](https://github.com/sidex15/susfs4ksu-module). - [ ] Reboot. **3. Meta Module (if mounting modules)** - [ ] [NoMount](https://github.com/maxsteeel/nomount) (Recommended) — `NoMount-metamodule-*commit*.zip` from [Releases](https://github.com/WildKernels/GKI_KernelSU_SUSFS/releases) - [ ] [Mountify](https://github.com/backslashxx/mountify) — latest compatible module > [!NOTE] > Only one is required. Compatibility with SUSFS shifts with updates. **4. DroidSpaces** - [ ] Download the app: [ravindu644/Droidspaces-OSS](https://github.com/ravindu644/Droidspaces-OSS) **5. Troubleshooting** - **General issues** — try restarting your device. - **Bootloop** — restore a stock boot.img via fastboot/recovery. - **Manager and kernel version do not match (e.g. 31000 != 32000)** — install the latest kernel and manager from the release and reboot. - **Root not working** — ensure the manager matches the flashed flavor (KernelSU / KernelSU-Next / ReSukiSU). > [!CAUTION] > **Nuclear option:** Uninstall all modules and reboot, then delete all files and folders in `/data/adb`. Reboot again. This wipes all KernelSU/Magisk module data — only use if nothing else works.

Other methods

Alternative flashing tools

- [PixelFlasher](https://github.com/badabing2005/PixelFlasher) - [Franco Kernel Manager](https://play.google.com/store/apps/details?id=com.franco.kernel&hl=en_CA&pli=1)

[!NOTE] Portions of this documentation are adapted from the official KernelSU documentation.

installation.md 6.0 KB История Исходник