#DESCRIPTION Odroid OpenElec

# U-Boot Parameters
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"

#------------------------------------------------------------------------------------------------------
#
# Boot Specific Stuff
#
#------------------------------------------------------------------------------------------------------
setenv bootrootfs "boot=LABEL=userdata disk=LABEL=oelec"

#------------------------------------------------------------------------------------------------------
#
# Console Setup
#
#------------------------------------------------------------------------------------------------------
setenv console "console=ttySAC2,115200n8"

#------------------------------------------------------------------------------------------------------
#
# Video output
#
# Setup the video output
#   Unset variable = automatic
#
#   setenv video_output "video=HDMI-A-1:1920x1080M@60" : 1080p (Use connected display's EDID)
#   setenv video_output "video=HDMI-A-1:1280x720@60"   :  720p (Use connected display's EDID)
# 
#   setenv video_output "drm_kms_helper.edid_firmware=edid/1920x1080.bin" : 1080p (Use system EDID)
#   setenv video_output "drm_kms_helper.edid_firmware=edid/1280x720.bin"  :  720p (Use system EDID)
#------------------------------------------------------------------------------------------------------
# setenv video_output "video=HDMI-A-1:1920x1080M@60"

#------------------------------------------------------------------------------------------------------
#
# OpenELEC variables
#
# Setup the OpenELEC options
#   valid values are: progress ssh debugging quiet break verbose
#------------------------------------------------------------------------------------------------------
setenv openelec "quiet ssh"

#------------------------------------------------------------------------------------------------------
#
# MAC Network Address
#
#------------------------------------------------------------------------------------------------------
setenv macaddr "00:1e:06:61:7a:39"

#------------------------------------------------------------------------------------------------------
#
# Kernel boot
#
#------------------------------------------------------------------------------------------------------
setenv bootargs "${console} ${bootrootfs} ${openelec} smsc95xx.macaddr=${macaddr}"

# ========================================================
# = RESTORE boot.scr FOR MULTIBOOT, DO NOT CHANGE        =
# ========================================================
mmc list
mmc dev

setenv change_osdev no;

setenv bootdev "0:1";
if test "${mmc_boot_device}" = "0"; then
  setenv bootdev "0:1";
elif test "${mmc_boot_device}" = "1"; then
  setenv bootdev "1:1";
fi

setenv os_dev "${bootdev}";
if test "${change_osdev}" = "yes"; then
  if test "${bootdev}" = "0:1"; then
    setenv os_dev "1:1";
  else
    setenv os_dev "0:1";
  fi
fi
# ========================================================

fatload mmc ${os_dev} 40008000 multiboot/KERNEL
fatload mmc ${os_dev} 42000000 multiboot/INITRD
fatload mmc ${os_dev} 44000000 multiboot/exynos5422-odroidxu3.dtb.oelec

# === RESTORE MULTIBOOT SCRIPT ===========================
fatload mmc ${bootdev} 0x60000000 multiboot/boot.scr.multi
fatwrite mmc ${bootdev} 0x60000000 boot.scr ${filesize}
#=========================================================

# Boot the board
bootz 40008000 42000000 44000000