Odroid_Multiboot_C2-switch-linux-to-jeedom/C1/multiboot/meson8b_odroidc.dts.multi

/dts-v1/;
/{
        compatible = "AMLOGIC,8726_M8B";
        model = "AMLOGIC";
        interrupt-parent = <&gic>;
        #address-cells = <1>;
        #size-cells = <1>;

    cpus {
        #address-cells = <1>;
        #size-cells = <0>;
        cpu@0 {
                device_type = "cpu";
                compatible = "arm,cortex-a5";
                reg = <0x200>;
        };
        cpu@1 {
                device_type = "cpu";
                compatible = "arm,cortex-a5";
                reg = <0x1>;
        };
        cpu@2 {
                device_type = "cpu";
                compatible = "arm,cortex-a5";
                reg = <0x2>;
        };
        cpu@3 {
                device_type = "cpu";
                compatible = "arm,cortex-a5";
                reg = <0x3>;
        };
    };

    cache-controller {
          compatible = "arm,meson-pl310-cache";
          reg = <0xc4200000 0x1000>;
          arm,data-latency = <3 3 3>;
          arm,tag-latency = <2 2 2>;
          arm,filter-ranges = <0x100000 0xc0000000>;
          cache-unified;
          cache-level = <2>;
          aux-instruction_prefetch;
          aux-data_prefetch;
          aux-ns_lockdown;
          aux-force_no_write_alloc;
          aux-cache_replace_policy_round_robin;
          aux-early_write_response;
          aux-full_line_of_zero;
          aux-ns_int_ctrl;
          aux-share_override;
          prefetch-double_line_fill;
          prefetch-prefetch_drop;
          prefetch-prefetch_offset = <7>;
    };

        memory{
                device_type = "memory";
                aml_reserved_start = <0x06000000>; /**reserved memory start */
                aml_reserved_end = <0x05000000>;/**reserved memory end : dtb start for uboot*/
                phys_offset = <0x00200000>;
                linux,total-memory = <0x3fe00000>;
        #address-cells = <1>;
        #size-cells = <1>;

        cma_0:region@0 {
           region_name = "cma_0";
           reg = <0 0x02a00000>;
           linux,contiguous-region;
        };
        };

        gic:interrupt-controller{
        compatible = "arm,cortex-a9-gic";
        reg = <0xc4301000 0x1000
               0xc4300100 0x0100>;
        interrupt-controller;
        #interrupt-cells = <3>;
        #address-cells = <0>;
    };

            meson-rng {
                    compatible = "amlogic,meson-rng";
                    status = "ok";
            };

    vpu{
                compatible = "amlogic,vpu";
                dev_name = "vpu";
                status = "ok";
                clk_level = <3>;
        };

        mesonfb{
                compatible = "amlogic,mesonfb";
                dev_name = "mesonfb";
                status = "okay";
                reserve-memory = <0x01800000  0x00100000>;
                reserve-iomap = "true";
                vmode = <0>; /**0:VMODE_720P 1:VMODE_LCD  2:VMODE_LVDS_1080P 3:VMODE_1080P*/
                scale_mode = <1>; /*0:default 1:new*/
                4k2k_fb = <0>;
                display_size_default = <1280 720 1280 1440 32>; //1920*1080*4*3 = 0x17BB000
        };

        mesonstream{
                compatible = "amlogic,mesonstream";
                dev_name = "mesonstream.0";
                status = "okay";
                reserve-memory = <0x02000000>; // 32M
                reserve-iomap = "true";
        };

        vdec{
                compatible = "amlogic,vdec";
                dev_name = "vdec.0";
                status = "okay";
                reserve-memory = <0x04000000>; // 64M
                reserve-iomap = "true";
        };

    ppmgr{
                compatible = "amlogic,ppmgr";
                dev_name = "ppmgr";
                status = "okay";
                reserve-memory = <0x01000000>; // 16M
        };

    amvenc_avc{
                compatible = "amlogic,amvenc_avc";
                dev_name = "amvenc_avc.0";
                status = "okay";
                linux,contiguous-region = <&cma_0>;
                reserve-iomap = "true";
        };

    ion_dev{
                compatible = "amlogic,ion_dev";
                dev_name = "ion_dev";
                status = "okay";
                share-memory-name = "ppmgr0";
                share-memory-offset = <0>;
                share-memory-size = <0x01000000>; //16M
    };

    deinterlace{
                compatible = "amlogic,deinterlace";
                dev_name = "deinterlace";
                status = "okay";
                reserve-memory = <0x02100000>; //10x1920x1088x3/2=33M
        };

    mesonvout{
                compatible = "amlogic,mesonvout";
                dev_name = "mesonvout";
                status = "okay";
        };

    rtc{
                compatible = "amlogic,aml_rtc";
                status = "okay";
        };

        uart_ao{
                compatible = "amlogic,aml_uart";
                port_name = "uart_ao";
                status = "okay";
                dev_name = "uart_ao";
                pinctrl-names = "default";
                pinctrl-0 = <&ao_uart_pins>;
        };

        uart_1{
                compatible = "amlogic,aml_uart";
                port_name = "uart_b";
                status = "okay";
                dev_name = "uart_1";
        pinctrl-names = "default";
        pinctrl-0 = <&b_uart_pins>;
        };

    sdio{
        compatible = "amlogic,aml_sdio";
        dev_name = "aml_sdio.0";
        status = "okay";
        reg = <0xc1108c20 0x20>;
        pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins", "emmc_clk_cmd_pins", "emmc_all_pins", "sdio_clk_cmd_pins", "sdio_all_pins","sd_1bit_pins"; // "jtag_pin", "uartao_default";
        pinctrl-0 = <&sd_clk_cmd_pins>;
        pinctrl-1 = <&sd_all_pins>;
        pinctrl-2 = <&emmc_clk_cmd_pins>;
        pinctrl-3 = <&emmc_all_pins>;
        pinctrl-4 = <&sdio_clk_cmd_pins>;
        pinctrl-5 = <&sdio_all_pins>;
        pinctrl-6 = <&sd_1bit_pins>;

        emmc{
            status = "okay";
            port = <2>;          /**0:sdio_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */
            pinname = "emmc";
            ocr_avail = <0x200000>;          /**VDD voltage 3.3 ~ 3.4 */
            caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE","MMC_CAP_ERASE", "MMC_CAP_HW_RESET"; // MMC_CAP_NEEDS_POLL -- for detect, MMC_CAP_NONREMOVABLE -- for eMMC/TSD
            caps2 = "MMC_CAP2_BOOTPART_NOACC";
            f_min = <300000>;
            f_max = <50000000>;
            f_max_w = <50000000>;
            max_req_size = <0x20000>;          /**128KB*/
            gpio_dat3 = "BOOT_3";
            card_type = <1>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
        };

        sd{
            status = "okay";
            port = <1>;          /**0:sdio_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */
            pinname = "sd";
            ocr_avail = <0x200000>;          /**VDD voltage 3.3 ~ 3.4 */
            caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED";
            f_min = <300000>;
            f_max = <50000000>;
            f_max_w = <50000000>;
            max_req_size = <0x20000>;          /**128KB*/
            gpio_dat3 = "CARD_4";
            gpio_cd = "CARD_6";
            gpio_volsw = "GPIOAO_3";
            irq_in = <3>;
            irq_out = <5>;
            card_type = <5>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
        };
    };

    sdhc{
        compatible = "amlogic,aml_sdhc";
        dev_name = "aml_sdhc.0";
        status = "okay";
        reg = <0xc1108e00 0x3c>;
        pinctrl-names = "sdhc_sd_clk_cmd_pins", "sdhc_sd_all_pins", "sdhc_emmc_clk_cmd_pins", "sdhc_emmc_all_pins", "sdhc_sdio_clk_cmd_pins", "sdhc_sdio_all_pins";
        pinctrl-0 = <&sdhc_sd_clk_cmd_pins>;
        pinctrl-1 = <&sdhc_sd_all_pins>;
        pinctrl-2 = <&sdhc_emmc_clk_cmd_pins>;
        pinctrl-3 = <&sdhc_emmc_all_pins>;
        pinctrl-4 = <&sdhc_sdio_clk_cmd_pins>;
        pinctrl-5 = <&sdhc_sdio_all_pins>;
        //pinctrl-6 = <&sd_1bit_pins>;

         sd{
             status = "okay";
             port = <4>;          /**0:sdhc_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */
             pinname = "sd";
             ocr_avail = <0x00200080>; // 3.3:0x200000, 1.8+3.3:0x00200080
             caps = "MMC_CAP_4_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED","MMC_CAP_UHS_SDR12","MMC_CAP_UHS_SDR25","MMC_CAP_UHS_SDR50","MMC_CAP_UHS_SDR104";
             f_min = <300000>;
             f_max = <100000000>;
             max_req_size = <0x20000>;          /**128KB*/
             gpio_dat3 = "CARD_4";
             //jtag_pin = "CARD_0";
             gpio_cd = "CARD_6";
             //gpio_ro = "GPIOZ_0";
             gpio_volsw = "GPIOAO_3";
             irq_in = <3>;
             irq_out = <5>;
             card_type = <5>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
         };

        emmc{
            status = "okay";
            port = <5>;          /**0:sdio_a, 1:sdio_b, 2:sdio_c, 3:sdhc_a, 4:sdhc_b, 5:sdhc_c */
            pinname = "emmc";
            ocr_avail = <0x00200080>;          /**VDD voltage 3.3 ~ 3.4 */
            caps = "MMC_CAP_8_BIT_DATA","MMC_CAP_MMC_HIGHSPEED","MMC_CAP_SD_HIGHSPEED", "MMC_CAP_NONREMOVABLE","MMC_CAP_ERASE", "MMC_CAP_HW_RESET"; // MMC_CAP_NEEDS_POLL -- for detect, MMC_CAP_NONREMOVABLE -- for eMMC/TSD
            caps2 = "MMC_CAP2_HS200_1_8V_SDR", "MMC_CAP2_BOOTPART_NOACC";
	        f_min = <300000>;
            f_max = <100000000>;
            max_req_size = <0x20000>;          /**128KB*/
            gpio_dat3 = "BOOT_3";
            card_type = <1>; /* 0:unknown, 1:mmc card(include eMMC), 2:sd card(include tSD), 3:sdio device(ie:sdio-wifi), 4:SD combo (IO+mem) card, 5:NON sdio device(means sd/mmc card), other:reserved */
        };
    };

    i2c@c1108500{ /*I2C-A*/
                compatible = "amlogic,aml_i2c";
                dev_name = "i2c-A";
                status = "ok";
                reg = <0xc1108500 0x20>;
                device_id = <1>;
                pinctrl-names="default";
                pinctrl-0=<&a_i2c_master>;
                #address-cells = <1>;
                #size-cells = <0>;
                use_pio = <0>;
                master_i2c_speed = <100000>;
        };

        i2c@c11087c0{ /*I2C-B*/
                compatible = "amlogic,aml_i2c";
                dev_name = "i2c-B";
                status = "ok";
                reg = <0xc11087c0 0x20>;
                device_id = <2>;
                pinctrl-names="default";
                pinctrl-0=<&b_i2c_master>;
                #address-cells = <1>;
                #size-cells = <0>;
                use_pio = <0>;
                master_i2c_speed = <100000>;

		/* Hardkernel I2C 3.5" Touchscreen */
		/* drivers/input/sx865x.c */
		sx865x: sx865x@49	{
			status = "okay";
			compatible = "semtech,sx8650";
			reg = <0x49>;
			#clock-cells = <0>;

			/* H/W Pin control setup */
			gpio-pendown = "GPIOX_1";
			gpio-reset = "GPIOX_2";

			/* platform data setup */
			invert-x = <0>;
			invert-y = <1>;
			swap-xy = <1>;
		};
        };

    i2c@c11087e0{ /*I2C-C*/
                compatible = "amlogic,aml_i2c";
                dev_name = "i2c-C";
                status = "ok";
                reg = <0xc11087e0 0x20>;
                device_id = <3>;
                pinctrl-names="default";
//              pinctrl-0=<&c_i2c_master>;
                #address-cells = <1>;
                #size-cells = <0>;
                use_pio = <0>;
                master_i2c_speed = <300000>;
        };

        i2c@c1108d20{ /*I2C-D*/
                compatible = "amlogic,aml_i2c";
                dev_name = "i2c-D";
                status = "ok";
                reg = <0xc1108d20 0x20>;
                device_id = <4>;
                pinctrl-names="default";
//              pinctrl-0=<&d_i2c_master>;
                #address-cells = <1>;
                #size-cells = <0>;
                use_pio = <0>;
                master_i2c_speed = <300000>;
        };

    dvfs {
        compatible = "amlogic, amlogic-dvfs";                   /** fixed for driver, don't change       */
        #address-cells = <1>;
        #size-cells = <0>;
        status = "ok";

        vcck_dvfs {
            dvfs_id     = <1>;                                  /** must be value of (1 << n)            */
            table_count = <16>;                                 /** must be correct count for dvfs_table */
            /*change-frequent-only;*/
            dvfs_table  = <
            /* NOTE: frequent in this table must be ascending order */
            /* frequent(Khz)    min_uV      max_uV                  */
					96000         825000      825000
					192000         825000      825000
					312000         825000      825000
					408000         825000      825000
					504000         825000      825000
					600000         825000      825000
					720000         825000      825000
					816000         850000      850000
					1008000         875000      875000
					1200000         925000      925000
					1320000        1100000     1100000
					1488000        1100000     1100000
					1536000	       1140000     1140000
					1632000	       1140000     1140000
					1728000        1140000     1140000
					1824000        1140000     1140000
            >;
        };
    };

    meson_vcck_dvfs_driver{
        compatible = "amlogic, meson_vcck_dvfs";
        dev_name = "meson_vcck_dvfs_driver";
        status = "ok";
        pinctrl-names = "default";
        pinctrl-0 = <&aml_pwm_pins>;
        use_pwm = <1>;
        pmw_controller = "PWM_C";
        table_count = <29>;
        cs_voltage_table = <
		0x10f001b        860000
		0x1050025        870000
		0x0fc002e        880000
		0x0f30037        890000
		0x0ea0040        900000
		0x0e10049        910000
		0x0d60054        920000
		0x0cb005f        930000
		0x0c0006a        940000
		0x0b50075        950000
		0x0aa0080        960000
		0x0a0008a        970000
		0x0960094        980000
		0x08d009d        990000
		0x07b00af        1000000
		0x07200b8        1010000
		0x06900c1        1020000
		0x06000ca        1030000
		0x05700d3        1040000
		0x04e00dc        1050000
		0x04500e5        1060000
		0x03c00ee        1070000
		0x03300f7        1080000
		0x02a0100        1090000
		0x0180109        1100000
		0x00f011b        1110000
		0x00a0120        1120000
		0x0050125        1130000
		0x000012a        1140000
        >;
    };

    arm_pmu {
        compatible = "arm,cortex-a9-pmu";
        status = "ok";
        interrupts = <0     137     0x04
                      0     138     0x04
                      0     153     0x04
                      0     154     0x04>;
    };


    usb_con {
                lm-compatible = "logicmodule-bus";

                usb_b{
                        lm-compatible = "amlogic,usb";
                        lm-periph-id = <1>; /** lm name */
                        clock-src = "usb1"; /** clock src */
                        port-id = <1>; /** ref to mach/usb.h */
                        port-type = <1>;        /** 0: otg, 1: host, 2: slave */
                        port-speed = <0>; /** 0: default, 1: high, 2: full */
                        port-config = <0>; /** 0: default */
                        port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/
                        port-id-mode = <1>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
                        gpio-hub-rst = "GPIOAO_4";
                        status = "okay";
                };

                usb_a{
                        lm-compatible = "amlogic,usb";
                        lm-periph-id = <0>; /** lm name */
                        clock-src = "usb0"; /** clock src */
                        port-id = <0>;  /** ref to mach/usb.h */
                        port-type = <0>;        /** 0: otg, 1: host, 2: slave */
                        port-speed = <0>; /** 0: default, high, 1: full */
                        port-config = <0>; /** 0: default */
                        port-dma = <0>; /** 0: default, 1: single, 2: incr, 3: incr4, 4: incr8, 5: incr16, 6: disable*/
                        port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
                        gpio-vbus-power = "GPIOAO_5";
                        gpio-work-mask  = <1>; /**0: work on pulldown,1:work on pullup*/
                        status = "okay";
                };
        };

    audio_platform{
        compatible = "amlogic,aml-i2s";
        dev_name = "aml-i2s.0";
        status = "okay";
    };

    audio_dai{
        compatible = "amlogic,aml-i2s-dai";
        dev_name = "aml-i2s-dai.0";
        status = "okay";
    };
    audio_spdif_dai{
        compatible = "amlogic,aml-spdif-dai";
        dev_name = "aml-spdif-dai.0";
        status = "okay";
    };

    audio_spdif_codec{
        compatible = "amlogic,aml-spdif-codec";
        dev_name = "spdif-dit.0";
        pinctrl-names = "aml_audio_spdif";
        pinctrl-0 = <&audio_spdif_pins>;
        status = "okay";
    };

    audio_pcm_dai{
        compatible = "amlogic,aml-pcm-dai";
        dev_name = "aml-pcm-dai.0";
        status = "okay";
    };

    audio_pcm{
        compatible = "amlogic,aml-pcm";
        dev_name = "aml-pcm.0";
        status = "okay";
    };

    pcm5102{
        compatible = "hardkernel,pcm5102";
        dev_name = "pcm5102.0";
        status = "okay";
    };

    aml_m8_sound_card{
        compatible = "sound_card, aml_snd_m8";
        aml,sound_card = "ODROID-HDMI";
        sleep_time = <130>;
        status = "okay";
    };

    odroid_sound_card{
        compatible = "sound_card, odroid_snd";
        aml,sound_card = "ODROID-DAC";
        pinctrl-names = "odroid_i2s";
        pinctrl-0 = <&audio_pins>;
        status = "okay";
    };

    odroid_hifi2{
        compatible = "sound_card, odroid_dac2";
        aml,sound_card = "ODROID-DAC2";
        pinctrl-names = "odroid_i2s";
        pinctrl-0 = <&audio_pins>;
        status = "okay";
    };

        saradc{
                compatible = "amlogic,saradc";
                status = "okay";
        };

        meson-ir {
                compatible = "amlogic,meson6-ir";
                reg = <0xc8100580 0x20>;
                interrupts = <0 15 1>;
                pinctrl-names = "default";
                pinctrl-0 = <&remote_pins>;
                pulse-inverted;
                status = "ok";
        };

    spi@cc000000{
                compatible = "amlogic,apollo_spi_nor";
                status = "ok";
                reg = <0xcc000000 0x04000000>;
                pinctrl-names = "default";
                pinctrl-0 = <&aml_spi_nor_pins>;

                nr-parts = <2>;
                nr-part-0 = <&bootloader>;
                nr-part-1 = <&ubootenv>;

                bootloader:bootloader{
                        name = "bootloader";
                        offset = <0>;
                        size = <0x100000>;
                };

                ubootenv:ubootenv{
                        name = "ubootenv";
                      offset = <0x100000>;
                      size = <0x10000>;
                };
        };

    spi@c1108d80 {
        #address-cells = <1>;
        #size-cells = <0>;
        compatible = "amlogic,spicc";
        dev_name = "spicc";
        status = "okay";
        reg = <0xc1108d80 0x28>;
        pinctrl-names="default";
        pinctrl-0=<&aml_spicc_pins>;
        device_id = <0>;
        num_chipselect = <2>;
        cs_gpios = "GPIOX_20", "GPIOX_21";

        spidev@0 {
            spi-max-frequency = <2000000>;
            compatible = "spidev";
            reg = <0>;
        };
		/* SPI Touch Screen Define */
		ads7846@1 {
			spi-max-frequency = <1000000>;

            /*
			    Driver Select : "ti,tsc2046", "ti,ads7843", "ti,ads7845", "ti,ads7846", "ti,ads7873"
			        kernel/drivers/hardkernel/ads7846.c
			*/
			compatible = "ti,ads7846";

            /*
                SPI Chip Select : (0 ~ 1)
                    Chip Select = GPIOX_21 (CS1)
            */
			reg = <1>;

            /* AMLogic Interrupt Define */
            /*
                IRQ Source : (GPIO_IRQ0(0) ~ GPIO_IRQ7(7))
            */
            irq-source = <0>;

            /*
                IRQ Filter Select : (0 ~ 7)
                    Value 0 : No Filtering, Value 1 ~ 7 : value * 3 * 111nS(delay)
            */
            irq-filter = <7>;   /* 258.741us Delay */

            /*
                IRQ Trigger Select : (0 ~ 3)
                    GPIO_IRQ_HIGH = 0, GPIO_IRQ_LOW = 1, GPIO_IRQ_RISING = 2, GPIO_IRQ_FALLING = 3
            */
            irq-trigger = <3>;  /* GPIO_IRQ_FALLING (Trigger Interrupt) */

            /* Used Pen Down GPIO(IRQ GPIO) Select */
            pendown-gpio = "GPIOY_8";

	    ti,moving-average = <1>;
	    ti,mv-avg-length = <20>;
	    ti,swap-xy = <1>;
            ti,x-min = <0>;
            ti,x-max = <8000>;
            ti,y-min = <0>;
            ti,y-max = <4800>;
            ti,x-plate-ohms = <40>;
            ti,pressure-min = <0>;
            ti,pressure-max = <255>;

            linux,wakeup;
		};
    };

    efuse{
                compatible = "amlogic,efuse";
                dev_name = "efuse";
                status = "okay";
                plat-pos = <0 454>;
                plat-count = <58>;
                usid-min = <8>; /*reserved*/
                usid-max = <31>; /*reserved*/
        };

        thermal{
                compatible = "amlogic-thermal";
                #thermal-cells=<7>;
                dev_name = "aml_thermal";
        trip_point=<70 1488001 1488001 511 511 3 2
                    80 1200001 1200001 435 435 2 2
                    90  800001  800001 328 328 1 1
                    110 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff 0xffffffff>;
                cpu_cali_a=<0>;
                idle_interval=<1000>;
        use_virtual_thermal;
        freq_sample_period=<30>;
        report_time=<1 10 30 60>;         /* based on freq_sample_period */
        cpu_virtual=<
             500000  40  40  40  40
             600000  45  55  60  65
             800000  50  60  65  70
            1000000  55  65  70  75
            1200000  60  70  75  80
            1350000  65  75  80  85
        >;
        gpu_virtual=<
            183      40  40  40  40
            251      40  45  50  55
            319      50  60  65  70
            426      55  65  70  75
            511      60  70  75  80
        >;
        };

    amhdmitx{
                compatible = "amlogic,amhdmitx";
                dev_name = "amhdmitx";
                status = "ok";
        vend-data = <&vend_data>;
        pwr-ctrl = <&pwr_ctrl>;

        vend_data: vend_data{
            vendor_name = "Hardkernel";           /* Max Chars: 8     */
            vendor_id = <0x000000>;                 /* Refer to http://standards.ieee.org/develop/regauth/oui/oui.txt   */
            product_desc = "ODROID-C1";        /* Max Chars: 16    */
            cec_osd_string = "ODROID-C1";        /* Max Chars: 14    */
            ao_cec = <0x000001>;
        };

        pwr_ctrl: pwr_ctrl{
            pwr_5v_on = "";
            pwr_5v_off = "";
            pwr_3v3_on = "";
            pwr_3v3_off = "";
            pwr_hpll_vdd_on = "";
            pwr_hpll_vdd_off = "";
        };
        };

    aml_pm{
                compatible = "amlogic,pm-m8";
                dev_name = "aml_pm_m8";
                status = "okay";
        };

    cpufreq-meson{
        compatible = "amlogic,cpufreq-meson";
	syspll_fixed;
        status = "okay";
    };

    crypto_device{
       compatible = "amlogic,crypto-device";
       dev_name = "crypto_device";
    };

        gpio:gpio{
                compatible = "amlogic,m8b-gpio";
                dev_name = "gpio";
                #gpio-cells=<2>;
        };

    pinmux{
                compatible = "amlogic,pinmux-m8b";
                dev_name = "pinmux";
                #pinmux-cells=<2>;

                ao_uart_pins:ao_uart{
                        amlogic,setmask=<10 0x1800>;
                        amlogic,pins="GPIOAO_0", "GPIOAO_1";
                        amlogic,pullup=<1>;
                        amlogic,pullupen=<1>;
                };

//              a_uart_pins:a_uart{
//                      amlogic,setmask=<4 0x3c00>;
//                      amlogic,pins="GPIOX_12", "GPIOX_13", "GPIOX_14", "GPIOX_15";
//              };

                b_uart_pins:b_uart{
                        amlogic,setmask=<4 0x0300>;
                        amlogic,pins="GPIOX_16", "GPIOX_17";
                        amlogic,pullup=<1>;
                        amlogic,pullupen=<1>;
                };

                nand_input_state:nand_input{
                        amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4",
                                                "BOOT_5","BOOT_6","BOOT_7","BOOT_12","BOOT_13",
                                                "BOOT_8","BOOT_9","BOOT_10","BOOT_11",
                                                "BOOT_14","BOOT_15","BOOT_16","BOOT_17";
                        amlogic,enable-output=<1>;
                };

                conf_nand_state: conf_nand{
                        amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4",
                                                "BOOT_5","BOOT_6","BOOT_7","BOOT_15";
                        amlogic,pullup=<0>;
                };

                nand_base: nand{
                        amlogic,setmask=<2 0x7fe0000>;
                        amlogic,clrmask=<       5 0xe
                                                        6 0x3f000000
                                                        4 0x7c000000>;
                        amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4",
                                                "BOOT_5","BOOT_6","BOOT_7","BOOT_8","BOOT_9",
                                                "BOOT_10","BOOT_12","BOOT_13",
                                                "BOOT_14","BOOT_15","BOOT_16","BOOT_17";
                };

                sdhc_b_pins:sdhc_b_pin{
                        amlogic,setmask=<2 0xfc00>;
                        amlogic,clrmask=<2 0xf0 8 0x600>;
                        amlogic,pins="CARD_0","CARD_1","CARD_2","CARD_3","CARD_4","CARD_5";
                };

                sdhc_c_pins:sdhc_c_pin{
                        amlogic,setmask=<6 0x3f000000>;
                        amlogic,clrmask=<4 0x6c000000 2 0x4c00000>;
                        amlogic,pins="BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_10","BOOT_11";
                };

                sdhc_a_pins:sdhc_a_pin{
                        amlogic,setmask=<8 0x3f>;
                        amlogic,clrmask=<5 0x6c00 >;
                        amlogic,pins="GPIOX_0","GPIOX_1","GPIOX_2","GPIOX_3","GPIOX_8","GPIOX_9";
                };

        sdio_all_pins:sdio_all_pins{
            amlogic,setmask=<8 0x0000003f>;         /*sdio a*/
            amlogic,clrmask=<6 0x3f000000           /*sdio c*/
                                2 0x0000fc00        /*sdio b*/
                                5 0x00006c00>;      /*sdhc a*/
            amlogic,pins = "GPIOX_0","GPIOX_1","GPIOX_2","GPIOX_3","GPIOX_8","GPIOX_9";
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        sdio_clk_cmd_pins:sdio_clk_cmd_pins{
            amlogic,setmask=<8 0x00000003>;         /*sdio a*/
            amlogic,clrmask=<6 0x3f000000           /*sdio c*/
                                2 0x0000fc00        /*sdio b*/
                                5 0x00006c00>;      /*sdhc a*/
            amlogic,pins = "GPIOX_8","GPIOX_9"; /** GPIOX_8:CLK, GPIOX_9:CMD */
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        sd_all_pins:sd_all_pins{
            amlogic,setmask=<2 0x0000fc00>;         /*sdio b*/
            amlogic,clrmask=<6 0x3f000000           /*sdio c*/
                                8 0x0000063f        /*sdio a, UART*/
                                2 0x000000f0>;      /*sdhc b*/
            amlogic,pins = "CARD_0","CARD_1","CARD_2","CARD_3","CARD_4","CARD_5";
            amlogic,enable-output=<1>; /* 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        sd_1bit_pins:sd_1bit_pins{
            amlogic,setmask=<2 0x00008c00>;         /*sdio b*/
            amlogic,clrmask=<6 0x3f000000           /*sdio c*/
                                8 0x0000003f        /*sdio a*/
                                2 0x000000f0>;      /*sdhc b*/
            amlogic,pins = "CARD_0","CARD_1","CARD_2","CARD_3","CARD_4","CARD_5";
            amlogic,enable-output=<1>; /* 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        sd_clk_cmd_pins:sd_clk_cmd_pins{
            amlogic,setmask=<2 0x00000c00>;         /*sdio b*/
            amlogic,clrmask=<6 0x3f000000           /*sdio c*/
                                8 0x0000003f        /*sdio a*/
                                2 0x000000f0>;      /*sdhc b*/
            amlogic,pins = "CARD_2","CARD_3"; /** CARD_2:CLK, CARD_3:CMD */
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        emmc_all_pins:emmc_all_pins{
            amlogic,setmask=<6 0xfc000000>;         /*sdio c*/
            amlogic,clrmask=<2 0x06c2fc00           /*sdio b & nand*/
                                8 0x0000003f        /*sdio a*/
                                4 0x6c000000>;        /*sdhc c*/
            amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_8","BOOT_10";
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        emmc_clk_cmd_pins:emmc_clk_cmd_pins{
            amlogic,setmask=<6 0xc0000000>;         /*bit[30-31] */
            amlogic,clrmask=<2 0x06c2fc00           /*sdio b & nand   nand bit17 bit25*/
                                8 0x0000003f        /*sdio a*/
                                7 0xc0000>;        /*sdhc c bit 18-19*/
            amlogic,pins = "BOOT_8","BOOT_10"; /** BOOT_10:CMD, BOOT_8:CLK */
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

        sdhc_sd_clk_cmd_pins:sdhc_sd_clk_cmd_pins{
            amlogic,setmask=<2 0x00000030>;         /*sdhc b*/
            amlogic,clrmask=<5 0x00007c00           /*sdhc a*/
                                4 0x7c000000        /*sdhc c*/
                                2 0x0000fc00        /*sdio b*/
                                8 0x00000600>;      /*UART*/
            amlogic,pins = "CARD_2","CARD_3"; /* CARD_2:CLK, CARD_3:CMD */
            amlogic,enable-output=<1>; /* 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };
        sdhc_sd_all_pins:sdhc_sd_all_pins{
            amlogic,setmask=<2 0x000000f0>;         /*sdhc b*/
            amlogic,clrmask=<5 0x00007c00           /*sdhc a*/
                                4 0x7c000000        /*sdhc c*/
                                2 0x0000fc00        /*sdio b*/
                                8 0x00000600>;      /*UART*/
            amlogic,pins="CARD_0","CARD_1","CARD_2","CARD_3","CARD_4","CARD_5";
            amlogic,enable-output=<1>; /* 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };
        sdhc_emmc_clk_cmd_pins:sdhc_emmc_clk_cmd_pins{
            amlogic,setmask=<7 0xc0000>;         /*bit[18-19] */
            amlogic,clrmask=<2 0x04c000f0           /*sdhc b & nand*/
                                5 0x00007c00        /*sdhc a*/
                                6 0xff000000>;        /*sdio c*/
            amlogic,pins = "BOOT_8","BOOT_10"; /** BOOT_10:CMD, BOOT_8:CLK */
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };
        sdhc_emmc_all_pins:sdhc_emmc_all_pins{
            amlogic,setmask=<4 0x70000000
                             7 0xc0000>;         /*sdhc c*/
            amlogic,clrmask=<2 0x04c000f0           /*sdhc b & nand*/
                                5 0x00007c00        /*sdhc a*/
                                6 0xff000000>;        /*sdio c*/
            amlogic,pins = "BOOT_0","BOOT_1","BOOT_2","BOOT_3","BOOT_4","BOOT_5","BOOT_6","BOOT_7","BOOT_8","BOOT_10";
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };
        sdhc_sdio_clk_cmd_pins:sdhc_sdio_clk_cmd_pins{
            amlogic,setmask=<5 0x00000c00>;         /*sdhc a bit[10-11] */
            amlogic,clrmask=<2 0x058000f0           /*sdhc b*/
                                4 0x7c000000        /*sdhc c */
                                8 0x0000003f>;        /*sdio a*/
            amlogic,pins = "GPIOX_8","GPIOX_9"; /** BOOT_16:CMD, BOOT_17:CLK */
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };
        sdhc_sdio_all_pins:sdhc_sdio_all_pins{
            amlogic,setmask=<5 0x00006c00>;         /*sdhc a*/
            amlogic,clrmask=<2 0x058000f0           /*sdhc b*/
                                4 0x7c000000        /*sdhc c */
                                8 0x0000003f>;        /*sdio a*/
            amlogic,pins = "GPIOX_0","GPIOX_1","GPIOX_2","GPIOX_3","GPIOX_8","GPIOX_9";
            amlogic,enable-output=<1>; /** 0:output, 1:input */
            amlogic,pullup=<1>;
            amlogic,pullupen=<1>;
        };

                ao_i2c_master:ao_i2c{
                        amlogic,setmask=<10 0x60>;
                        amlogic,clrmask=<10 0x1800006>;
                        amlogic,pins="GPIOAO_4","GPIOAO_5";
                };

                a_i2c_master:a_i2c{
                        amlogic,setmask=<9 0xC0000000>;
                        amlogic,clrmask=<0 0x3C0300
                                         6 0xC00000
                                         8 0x1800000>;
                        amlogic,pins="GPIODV_24","GPIODV_25";
                };

                b_i2c_master:b_i2c{
                        amlogic,setmask=<9 0x30000000>;
                        amlogic,clrmask=<0 0x480
                                         6 0x300000
                                         8 0x10780000>;
                        amlogic,pins="GPIODV_26","GPIODV_27";
                };

// MATCH "I2C_D_pin_match" = "&d_i2c_master"
// L2 PROP_U32 2 = "amlogic,setmask"
// L2 PROP_STR 2 = "amlogic,pins"
//              d_i2c_master:d_i2c{
//                      amlogic,setmask=<4 0xc>;
//                      amlogic,pins="GPIOH_7","GPIOH_8";
//              };

        remote_pins:remote_pin{
                        amlogic,setmask=<10 0x1>;
                        amlogic,pins="GPIOAO_7";
                };

        audio_spdif_pins:audio_pin1{
            amlogic,setmask=<10 0x00010000>;
            amlogic,clrmask=<10 0x00040000
			      1 0x00002000>;
            amlogic,pins ="GPIOAO_6";
        };

        audio_pins:audio_pin{
            amlogic,setmask=<10 0x78000000>;
            amlogic,pins = "GPIOAO_8","GPIOAO_9","GPIOAO_10","GPIOAO_11";
        };

                aml_spi_nor_pins: aml_spi_nor_pins{
                        amlogic,setmask=<5 0xf>;
                        amlogic,clrmask=<2 0x380000>;
                        amlogic,pins = "BOOT_11","BOOT_12","BOOT_13","BOOT_18";
                };

                aml_spicc_pins: aml_spicc_pins{
                        amlogic,setmask=<4 0x03c00000
                        >;
                        amlogic,clrmask=<3 0x004003C0
                                         5 0x00000C00
                                         6 0x000F0000
                                         7 0x80000000
                                         8 0x00000003
                                         9 0x00080000>;
                        amlogic,pins = "GPIOX_8","GPIOX_9","GPIOX_10";
                };

		aml_pwm_pins:aml_pwm{
			amlogic,setmask=<3 0x1000000>;
			amlogic,clrmask=<0 0x48
					 7 0x10000020>;
			amlogic,pins="GPIODV_9";
		};

		odroid_pwm0:odroid_pwm0{
            amlogic,setmask=<2 0x00000008>;     /*GPIOX_11 PWM_B Reg2[3]*/
            amlogic,clrmask=<3 0x00100000
                             7 0x40000000>;     
            amlogic,pins="GPIOX_11";
		};
		odroid_pwm1:odroid_pwm1{
            amlogic,setmask=<2 0x00000008       /*GPIOX_11 PWM_B Reg2[3]*/
                             9 0x00080000>;     /*GPIOX_10 PWM_E Reg9[19]*/
            amlogic,clrmask=<3 0x00500100
                             4 0x00800000
                             6 0x00020000
                             7 0xc0000000>;
            amlogic,pins="GPIOX_11","GPIOX_10";
		};
    };
    meson-eth{
                compatible = "amlogic,meson-eth";
                dev_name = "meson-eth";
                status = "okay";
                ethbaseaddr = <0xfe0c0000>;
                interruptnum = <40>;
                savepowermode = <0>;
                phy_interface = <0>;
                new_maclogic = <1>;
                reset_pin_enable = <0>;
                reset_pin = "GPI0H_4";
                reset_delay = <100>;
                disable_phyrefclk;
        };

    leds {
        compatible = "gpio-leds";
        /* Blue LED */
        hearbeat {
            label = "blue:heartbeat";
            gpios = "GPIOAO_13";
            default-state = "off";
            linux,default-trigger = "heartbeat";
        };
    };

    pwm{
        compatible = "amlogic, odroid-pwm";
        dev_name = "meson_pwm";
        status = "ok";
        pinctrl-names = "odroid_pwm0","odroid_pwm1";
        pinctrl-0 = <&odroid_pwm0>;
        pinctrl-1 = <&odroid_pwm1>;
    };

    pwm-ctrl {
        compatible = "amlogic, pwm-ctrl";
        dev_name = "pwm-ctrl";
        status = "ok";
    };

	w1 {
		compatible = "w1-gpio";
		dev_name = "w1";
        status = "ok";
        gpios = "GPIOY_3";
        // linux,open-drain; // .is_open_drain = 1;
	};

	amvideocap{
		compatible = "amlogic,amvideocap";
		dev_name = "amvideocap.0";
		status = "okay";
		reserve-memory = <0x00a00000>; // 1920 * 1088 * 4 = 8,355,840
		reserve-iomap = "true";
	};


	amlogic-watchdog {
		compatible = "amlogic,aml-wdt";
        default_timeout=<10>;
        reset_watchdog_method=<0>;//0:sysfs,1:kernel
        reset_watchdog_time=<2>;
        shutdown_timeout=<10>;
        firmware_timeout=<6>;
        suspend_timeout=<6>;
    };


}; /* end of / */