Odroid_Multiboot_C2-switch-linux-to-jeedom/scripts/check_u-boot

#!/bin/bash

# ******************************
# Install u-boot to SD/EMMC card
# ******************************

if [ "$(id -u)" != "0" ]; then
	echo "Script must be run as root !"
	exit 0
fi

if [ ! -f /opt/multiboot/u-boot.bin ]; then
	echo "ERROR: u-boot.bin not found"
	exit 1
fi

uboot_part="/dev/mmcblk0"
[ -b /dev/mmcblk0boot0 ] && uboot_part="/dev/mmcblk0boot0"

# Extract installed u-boot to file
dd if=${uboot_part} of=/tmp/this_u-boot.bin bs=512 skip=63 count=2048 > /dev/null 2>&1
if [ $? -ne 0 ]; then
	echo "ERROR extracting u-boot from mmcblk0"
	exit 2
fi

# compare
UBOOT_SIZE=$(stat -c%s /opt/multiboot/u-boot.bin)
cmp -s -n ${UBOOT_SIZE} /opt/multiboot/u-boot.bin /tmp/this_u-boot.bin
if [ $? -ne 0 ]; then
	# Not equal
	if [ "${uboot_part}" = "/dev/mmcblk0boot0" ]; then
		if [ -e /sys/block/mmcblk0boot0/force_ro ]; then
			echo 0 > /sys/block/mmcblk0boot0/force_ro
			if [ $? -ne 0 ]; then
				echo "ERROR enabling boot0."
				exit 1
			fi
		else
			echo "ERROR: boot0 not found."
			exit 1
		fi
	fi
	dd if=/opt/multiboot/u-boot.bin of=${uboot_part} bs=512 seek=63 > /dev/null 2>&1
	if [ $? -ne 0 ]; then
		echo "ERROR writting u-boot to mmcblk0"
		exit 3
	fi
	if [ "${uboot_part}" = "/dev/mmcblk0boot0" ]; then
		echo 1 > /sys/block/mmcblk0boot0/force_ro
	fi
	sync
	echo "u-boot on mmcblk0 UPDATED"
else
	echo "u-boot on mmcblk0 OK"
fi

[ ! -b /dev/mmcblk1 ] && exit 0

uboot_part="/dev/mmcblk1"
[ -b /dev/mmcblk1boot0 ] && uboot_part="/dev/mmcblk1boot0"

# Extract installed u-boot to file
dd if=${uboot_part} of=/tmp/this_u-boot.bin bs=512 skip=63 count=2048 > /dev/null 2>&1
if [ $? -ne 0 ]; then
	echo "ERROR extracting u-boot from mmcblk1"
	exit 4
fi

# compare
cmp -s -n ${UBOOT_SIZE} /opt/multiboot/u-boot.bin /tmp/this_u-boot.bin
if [ $? -ne 0 ]; then
	# Not equal
	if [ "${uboot_part}" = "/dev/mmcblk1boot0" ]; then
		if [ -e /sys/block/mmcblk1boot0/force_ro ]; then
			echo 0 > /sys/block/mmcblk1boot0/force_ro
			if [ $? -ne 0 ]; then
				echo "ERROR enabling boot0."
				exit 1
			fi
		else
			echo "ERROR: boot0 not found."
			exit 1
		fi
	fi
	dd if=/opt/multiboot/u-boot.bin of=${uboot_part} bs=512 seek=63 > /dev/null 2>&1
	if [ $? -ne 0 ]; then
		echo "ERROR writting u-boot to mmcblk1"
		exit 5
	fi
	if [ "${uboot_part}" = "/dev/mmcblk1boot0" ]; then
		echo 1 > /sys/block/mmcblk1boot0/force_ro
	fi
	sync
	echo "u-boot on mmcblk1 UPDATED"
else
	echo "u-boot on mmcblk1 OK"
fi

exit 0