|
|
@@ -1,41 +0,0 @@
|
|
|
-# Installation
|
|
|
-
|
|
|
-> [!CAUTION]
|
|
|
-> Wild Kernels is not responsible for bricked devices or damage. By flashing, you assume all risk. Back up your data and understand the risks before flashing.
|
|
|
-
|
|
|
-## Choose your method
|
|
|
-
|
|
|
-| Method | When to use | Requires root | Guide |
|
|
|
-|--------|-------------|---------------|-------|
|
|
|
-| **Custom Recovery** | Flash AnyKernel3 ZIP for your model/OneUI branch | No (unlocked bootloader) | See below |
|
|
|
-| **Kernel Flasher** | Upgrading with root already available, no PC needed | Yes | [Kernel Flasher](https://github.com/fatalcoder524/KernelFlasher) |
|
|
|
-
|
|
|
-## Prerequisites
|
|
|
-
|
|
|
-- [ ] Samsung device with an unlocked bootloader
|
|
|
-- [ ] Full backup (at minimum the `boot` partition or have a stock unmodified `boot.img`/`AP` tar)
|
|
|
-- [ ] Correct AnyKernel3 ZIP for your model/OneUI branch from [Releases](https://github.com/WildKernels/Samsung_KernelSU_SUSFS/releases)
|
|
|
-
|
|
|
-### Supported branches
|
|
|
-
|
|
|
-Samsung branches are per model + OneUI version (e.g. `SM-S938B-Oneui8.5`, `SM-S928B-Oneui7`, `SM-A546B-Oneui7`). See the matrix in [`.github/workflows/kernel-samsung.yml`](../.github/workflows/kernel-samsung.yml) for the full list. Match exactly to your device/OneUI version.
|
|
|
-
|
|
|
-## Flashing via recovery
|
|
|
-
|
|
|
-1. Download the AnyKernel3 ZIP matching your `BRANCH` (model + OneUI) and desired variant (KSUN/KSU/RESUKISU + features).
|
|
|
-2. Boot to custom recovery (TWRP/OrangeFox).
|
|
|
-3. Flash the ZIP — AnyKernel3 will patch the boot image in place.
|
|
|
-4. Reboot to system.
|
|
|
-
|
|
|
-For GKI generic instructions and manager setup, see also [GKI Installation Guide](https://github.com/WildKernels/GKI_KernelSU_SUSFS/blob/dev/docs/installation.md).
|
|
|
-
|
|
|
-## After flashing
|
|
|
-
|
|
|
-- Install your root manager (KernelSU-Next / KernelSU / ReSukiSU manager matching the flavor you flashed).
|
|
|
-- If you flashed with SUSFS, install the SUSFS module: [sidex15/susfs4ksu-module](https://github.com/sidex15/susfs4ksu-module) and verify hiding.
|
|
|
-- Check KernelSU app shows working, and test root with a root checker.
|
|
|
-
|
|
|
----
|
|
|
-
|
|
|
-> [!NOTE]
|
|
|
-> Portions of this documentation are adapted from the official [KernelSU documentation](https://kernelsu.org/).
|
TheWildJames